Image of Phanteks Enthoo 719 Full Tower DRGB Case - Gunmetal Grey
 

Phanteks Enthoo 719 Full Tower DRGB Case - Gunmetal Grey

The Enthoo 719 from PHANTEKS is a huge PC case for enthusiasts It is designed for large SSI-EEB and E-ATX motherboards The Full-Tower offers the possibility of customising the case's interior to meet your personal requirements even enabling users to install two power supplies or two complete systems under one roof There are also multiple options when it comes to installing a range of water cooling gear along with two vertically-mounted graphics cards In short the Enthoo 719 is ready for anything you care to throw at itTHE FEATURES OF THE PHANTEKS ENTHOO 719 AT A GLANCESuperb build quality Full-ATX design supporting motherboards up to SSI-EEB and E-ATXSupports dual systems with the help of the included bracketsTempered glass side door for quick and easy accessTotal of 8x 140- or 15x 120 mm fans possibleRadiators max 2x 480 mm 2x 360 mm and 1x 140 mmGraphics cards up to 503 mm vertical installation possible CPU coolers up to 195 mm4x 35- and 11x 25 slots up to 12x 35 slots possibleIO Panel with 1x USB 31 Type-C- and 4x USB 30 Type-AENTHOO 719 FULL-TOWER WITH MULTIPLE CUSTOMISATION OPTIONSThe case's exterior resembles at first glance its predecessor the Enthoo Luxe from PHANTEKS This Full-Tower case has been completely overhauled however this time offering an ingeniously designed interior boasting a black powder coating and an array of user-friendly touches the bottom of the case includes a vertical PSU shroud upon which either a second Mini-ITX format system or a second power supply can be installed Both brackets for this functionality come included as standardThe PHANTEKS Enthoo 719 supports SSI-EEB- E-ATX- ATX- Micro-ATX- and Mini-ITX-format motherboards Apart from the eight PCI slot brackets the case also offers support for two vertical triple-slot PCI slots meaning that graphics cards can be up to 503 mm in length while the tempered glass side allows you to enjoy the view from the outside A vertical GPU bracket comes included The case includes various rubberised cable ducts with velcro loops and extra coverings to enable users to benefit from extensive cable management options when it comes to achieving that clean and minimalist lookNote A compatible riser cable for the vertical mountinginstallation of graphics cards is not included and may be purchased separately in our online shopOPTIONS FOR AIR- AND WATER COOLINGThe Enthoo 719 is designed from the ground up for custom water cooling the front supports a radiator in the 480- or 420-mm format The fans are attached to the outside of the chassis meaning that space on the inside is maximised The roof supports 360- or 280 mm radiators with a total thickness of 55 mm before interfering with the top of the motherboardThe rear of the case supports a single 140- or 120 mm model fan A radiator up to 480 mm can fit onto the motherboard tray The right side wall offers multiple openings to help improve overall airflow The bottom of the case on the other hand supports a 360 mm radiator The roof and the front of the case include openings for fill- and drain ports each with a diameter of 205 mmPHANTEKS has also taken traditional air cooling into consideration enabling the installation of up to x15 120 mm fans The front has space for four 120- or three 140 mm models while the rear and roof supports 140- or 120 mm case fans The motherboard tray supports four 120 mm fans and the bottom of the case allows for three 120- or 140 mm fans CPU coolers may be up to 195 mm tallFAN HUB AND RGB-LED LIGHTINGPHANTEKS has thoughtfully included fan controls for up to eight fans in the Enthoo 719 Three 3-pin fans can be controlled via the speed signal and four 4-pin PWM fans using the PWM An additional 4-pin connector is designed for both control options Splitter cables available to purchase separately allow for even more fans to be connected to the hubThe PHANTEKS Enthoo 719 includes integrated RGB-LED lighting in the front cover as well as in the PSU shroud Colour and lighting modes can be selected using the buttons on the IO panel of the Full-Tower case and synchronised with other digitally addressable accessories via 3-pin RGB cable The 719 is compatible with ASUS Aura Sync MSI Mystic Light Sync Gigabyte RGB Fusion ASRock Polychrome Sync and Razer ChromaOPERATION AND CONNECTIVITY OPTIONSThe power button of the PHANTEKS Enthoo 719 is embedded in the roof of the case while the modular IO panel is situated on the front The front cover includes four USB 30 ports one USB 31 Type C connector a microphone input and a headphone jackThere are three additional buttons two for adjusting the colour and modes of the RGB lighting and the third which can act either as a reset button and HDD-LED indicator which is surrounded by a white LED or alternatively as a power switch and power LED for the subsidiary systemDRIVES HARD DRIVES AND SSDSA Full-Tower case like the Enthoo 719 is more than capable of fitting a wide array of drives by default the case supports eleven 25 drives behind the motherboard tray A small side window in the right side allows users to enjoy an unobstructed view of their installed SSDsThere are an additional four double trays each capable of holding two SSDs in the front these can be installed instead of a radiator on the motherboard tray The Enthoo 719 supports four modular stackable drive cages for 35 drives In total up to ten of said cages can be installed in the caseTECHNICAL DETAILSDimensions 240 x 570 x 595 mm (W x H x D)Weight approx 145 kgMaterial Steel aluminium Tempered Glass (side) plasticColour AnthraciteForm factor SSI-EEB (up to 340 mm wide) E-ATX ATX Micro-ATX Mini-ITXTotal possible fans3x 140 4x 120 mm (front)3x 140 120 mm (roof)1x 140 120 mm (rear)1x 140 3x 120 mm (bottom)4x 120 mm (MB Tray)Pre-installednoneFan HubOutputs3x 3-Pin DC4x 4-Pin PWM1x 4-Pin 3-Pin (Universal)Inputs1x 4-Pin PWM (Connection with motherboard)1x SATA powerRadiator Mountings (at the expense of HDD- andor fan slots)1x max 480 420 mm (front)1x max 360 (roof)1x max 140 120 mm (rear)1x max 360 (bottom)1x max 480 mm (MB tray)Filter Front PSU roof right side (removable)Drive Bays4x 35 (internal; decoupled; 8x optional via HDD bracket available separately)11x 25 (internal)PSU 2x Standard ATX (optional)Expansion slots 8 ( 2x 3 vertical)IO Panel1x USB 31 Type C4x USB 301x Audio InOutMax GPU length 503 mmMax CPU cooler height 195 mmMax front radiator dimensions fan 145 x 530 mmMax top rad dimensions fan 120 x 460 x 55 mmMax side rad dimensions fan 135 x 530 x 32 mmMax bottom rad dimensions fan 120 x 450 mmAccessories1x Fan hub (pre-installed 3x 3-pin and 5x 4-pin)4x Drive cages stackable1x Vertical GPU mount1x Graphics card support6x Cable binders with velcro fastener1x Dual PSU bracket (pre-installed)1x Dual system bracket1x Box of screws

Price: £208.49 from 365games.co.uk

Stockist Catalogue Product Name Price  
365games.co.uk Phanteks Enthoo 719 Full Tower DRGB Case - Gunmetal Grey £208.49 Visit Store

Related Products

 
Image of Phanteks Enthoo 719 Full Tower DRGB Case - Black
 

Phanteks Enthoo 719 Full Tower DRGB Case - Black

PRODUCT INFORMATIONENTHOO 719 FULL TOWER DRGB CASE - BLACKThe Enthoo 719 from PHANTEKS is a huge PC case for enthusiasts It is designed for large SSI-EEB and E-ATX motherboards The Full-Tower offers the possibility of customising the case's interior to...

£208.49
More Information

 
Image of Phanteks Enthoo Pro 2 Full Tower Case Tempered Glass Window DRGB Satin Black
 

Phanteks Enthoo Pro 2 Full Tower Case Tempered Glass Window DRGB Satin Black

The Phanteks Enthoo Pro 2 joins the high-end Enthoo line All the Enthoo cases are made from high quality materials and offer users an outstanding case for a powerful PC or workstation build The Enthoo Pro 2 is no exception with this particular model adding...

£146.99
More Information

 
Image of Phanteks Enthoo Evolv X Digital Midi Tower Glass Gaming Case - Gunmetal Grey
 

Phanteks Enthoo Evolv X Digital Midi Tower Glass Gaming Case - Gunmetal Grey

The Phanteks Evolv X is a premium Mid-Tower case built from a combination of anodized aluminium and powder coated steel It has a range of features targeted at gaming enthusiasts and professionals These include easy to install components advanced options...

£231.49
More Information